汽车电子检测_广东海银试验装备有限公司

页面导航

联系方式

联系人：陈生
电话：18925806291
城市：广东省,东莞市
东莞市横沥镇神田路6号大厦年

汽车电子检测

各类车用电子部件：

· 车用无线电

· 暖通空调

· 防盗中控系统

· 驾驶角度传感器

· 控制器

· 显示器

· 照明

· 底盘位置传感器和控制器

· 轮胎压力传感器

· 倒车提醒装置

· ACP、VCP、CCH 功放

· 全球定位装置

· 直流马达（用于天窗、座椅、车门、车窗、雨刮器）

EMC测试项目：

· 辐射发射测量

· 传导发射测量

· 传导瞬态发射测量

· 辐射抗扰度测试—电波暗室试验法

· 辐射抗扰度测试—横向电磁波小室试验法

· 大电流注入测试—代替法

· 大电流注入测试—闭环法

· 传导瞬态抗扰度测试—电源线

· 传导瞬态抗扰度测试—信号线、电感耦合钳试验法

· 传导瞬态抗扰度测试—信号线，直接电容耦合试验法

· 传导瞬态抗扰度测试—信号线，电容耦合钳试验法

· 磁场抗扰度测试

· 静电放电测试

测试标准：

CE	ECE R10	Unform provisions concerning the approval of vehicles with regard to electromagnetic compatibility.
CISPR	CISPR 25	Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of on-board receivers
EN	EN 13309	Construction machinery – Electromagnetic compatibility of machines with internal power supply
EN	EN 50498	Electromagnetic compatibility (EMC) – Product family standard for aftermarket electronic equipment in vehicles
EN	EN 55025	Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers
ISO	ISO 10605	Road vehicles — Test methods for electrical disturbances from electrostatic discharge
ISO	ISO 11452-1	Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology
ISO	ISO 11452-2	Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure
ISO	ISO 11452-3	Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic mode (TEM) cell
ISO	ISO 11452-4	Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI)
ISO	ISO 11452-5	Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline
ISO	ISO 11452-7	Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 7: Direct radio frequency (RF) power injection
ISO	ISO 11452-8	Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields
ISO	ISO 11452-9	Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 9: Portable transmitters
ISO	ISO 11452-10	Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 10: Immunity to conducted disturbances in the extended audio frequency range
ISO	ISO 12097-3	Road Vehicles – Airbag Components – Part 3: Testing of Inflator Assemblies
ISO	ISO 13766	Earth-moving machinery Electromagnetic compatibility
ISO	ISO 16750-2	Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Electrical loads
ISO	ISO 17025	General requirements for the competence of testing and calibration laboratories
ISO	ISO 7637-1	Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations
ISO	ISO 7637-1-2
ISO	ISO 7637-2	Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only
ISO	ISO 7637-3	Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
SAE	J1113-3	Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power
SAE	J1113-4	IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS.BULK CURRENT INJECTION (BCI) METHOD
SAE	J1113-11	Immunity to Conducted Transients on Power Leads
SAE	J1113-12	Electrical Interference by Conduction and CouplingCapacitive and Inductive Coupling via Lines Other than Supply Lines
SAE	J1113-13	Electromagnetic Compatibility Measurement Procedure for Vehicle ComponentsPart 13: Immunity to Electrostatic Discharge
SAE	J1113-21	Electronmagnetic Compatibility Measurement Procedure for Vehicle Components – Part 21: Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined Chamber
SAE	J1113-22	Electromagnetic Compatibility Measurement Procedure for Vehicle Components—Part 22—Immunity to Radiated Magnetic Fields
SAE	J1113-23	Electromagnetic Compatibility Measurement Procedure for Vehicle Components – Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz, Strip Line Method, Recommended Practice
SAE	J1113-24	Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz—Crawford TEM Cell and 10 kHz to 5 GHz—Wideband TEM Cell
SAE	J1113-41	Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and Modules for the Protection of Receivers Used on Board Vehicles
SAE	J1113-42	Electromagnetic Compatibility—Component Test Procedure—Part 42—Conducted Transient Emissions

ECE R10	CISPR 25	EN 13309	EN 50498
EN 55025	ISO 10605	ISO 11452-1	ISO 11452-2
ISO 11452-3	ISO 11452-4	ISO 11452-5	ISO 11452-7
ISO 11452-8	ISO 11452-9	ISO 11452-10	ISO 12097-3
ISO 13766	ISO 16750-2	ISO 17025	ISO 7637-1
ISO 7637-1-2	ISO 7637-2	ISO 7637-3	J1113-3
J1113-4	J1113-11	J1113-12	J1113-13
J1113-21	J1113-22	J1113-23	J1113-24
J1113-41	J1113-42